ODL 17069000R Guide d'installation télécharger pdf (Page 24)

TOOLS & PARTS

Carefully remove the tiles or shingles from the “work

area”. Set them aside in the same order or pattern as

when attached to the roof.

Select the correct hole cutting template for the tube

(10” or 14”).

Use the correct Hole Cutting Template to trace the

diameter of the outer template hole. A nail inserted

into the hole will help guide the template.

Drill a hole inside the traced circle to insert saw blade.

TIP

Use a reciprocating/sabre saw to cut the roof hole. .

Use gloves for safety.

Gloves

Hole Cutting Template

Power Saw

Hole Cutting Template

Hole Cut in Roof Deck

Remove Tiles & Cut Hole

Section-13b

Tile Roof Intallation

Using Formable Aluminum Flashing

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Pas de commentaire

ODL 17069000R Guide d'installation Page 24